Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 데이터 시트

제품 코드

1-F8075

104

<Functions of Linkage Menu>

● Select the function name

and return to the Linkage

menu by touching the

R T N b u t t o n . 　 O r t h e

H O M E / E X I T b u t t o n i s

pushed.

<SensorTouch™>

RETURN

This function secures contiguous unused slots

by rearranging the registration state when sensor

registration and deregistration are performed

repeatedly and the unused slots are fragmented.

Relocate of sensors to be used

1. Connect all the sensors and receiver

batteries to be used to the T14SG through a

hub as shown in the figure above.

2. Move the cursor to “RELOCATE” on page 7 of

the [SENSOR] screen.

3. Touch the RTN button.

This procedure changes the slot No. of one

registered sensor.

Sensor slot change

1. Connect the sensor and receiver battery to

be changed to the T14SG through a hub as

shown in the figure above.

2. Move the cursor to “SET SLOT” on page 7 of

the <Sensor> screen.

3. Touch the RTN button. A sensor details screen

appears.

4. Move the cursor to “LOAD” and touch the

RTN button.

5. The current start slot is displayed. Move the

cursor to the number of the start slot and

change it to the desired value.（Cannot be

set to a slot that cannot be allocated like the

table of all pages.）

6. Move the cursor to “WRITE” and touch the

RTN button.

All the sensors to be used are connected.

SENSOR

3-way hub

or Y-harnesses

Receivers

Battery

T14SG

SENSOR

SENSOR : RELOCATE

SENSOR : SET SLOT

3-way hub

or Y-harnesses

Receivers

Battery

T14SG

SENSOR

This page is set when using multiple telemetry sensors of the same type.

● Call page 7 by touching the S1 button 6 times from

the [SENSOR] menu.