Texas Instruments INA209EVM - INA209EVM Evaluation Module INA209EVM INA209EVM 데이터 시트
제품 코드
INA209EVM
www.ti.com
INA209 Software Overview
shows an error that appears if the computer cannot communicate with the EVM. If this error
occurs, check to see that the USB cable is connected. This error can also happen if the USB cable is
connected prior to connecting the USB Dig platform 9V power. Another possible reason for this error
message is a problem with the USB human interface device driver of the computer. Make sure that the
computer recognizes the device when the USB cable is plugged in. If the sound is on, you will hear the
distinctive sound that you expect when a USB device is properly connected to a PC with the Windows
operating system.
connected prior to connecting the USB Dig platform 9V power. Another possible reason for this error
message is a problem with the USB human interface device driver of the computer. Make sure that the
computer recognizes the device when the USB cable is plugged in. If the sound is on, you will hear the
distinctive sound that you expect when a USB device is properly connected to a PC with the Windows
operating system.
Figure 12. INA209EVM Software—No Communication With the USB Dig Platform
See
for an error that will occur if the INA209 test board is not communicating with the USB Dig
platform. If you get this error, check the connectors between the two boards; make sure the two 25-pin
D-sub connectors are completely pushed together. Another possible cause for this error is it that the
INA209 test board jumpers are set in the wrong positions.
D-sub connectors are completely pushed together. Another possible cause for this error is it that the
INA209 test board jumpers are set in the wrong positions.
19
SBOU055A – February 2008 – Revised February 2010
INA209 Evaluation Module
Copyright © 2008–2010, Texas Instruments Incorporated