Graupner Hendheld RC 2.4 GHz No. of channels: 12 33124 데이터 시트
제품 코드
33124
20
Transmitter description
Transmitter description
Transmitter operating elements
Attaching the transmitter's neck strap
There is an eyelet on the top side of the
mx-20 HoTT
transmitter (see fi gure at the right) to which a neck strap
can be attached. This anchor point has been chosen
because the transmitter is optimally balanced here when
it hangs from the strap.
Order No. 1121 Neck strap, 20 mm wide
Order No. 70
can be attached. This anchor point has been chosen
because the transmitter is optimally balanced here when
it hangs from the strap.
Order No. 1121 Neck strap, 20 mm wide
Order No. 70
Neck strap, 30 mm wide
Important notice:
In its delivered confi guration, the transmitter can only
operate any servos attached to the receiver by way
of the two joysticks. For reasons of fl exibility, all other
operating elements (CTRL 6 … 8, SW 1 … 9) are
designated as "free" by the software. These other
operating elements can be freely assigned to actuators
as described in the text for the "Control adjust" menu
on page 96 (winged aircraft models) or page 100
(helicopter models).
In its delivered confi guration, the transmitter can only
operate any servos attached to the receiver by way
of the two joysticks. For reasons of fl exibility, all other
operating elements (CTRL 6 … 8, SW 1 … 9) are
designated as "free" by the software. These other
operating elements can be freely assigned to actuators
as described in the text for the "Control adjust" menu
on page 96 (winged aircraft models) or page 100
(helicopter models).
antenna with kink and twist joint
proportional speed control CTRL 7
3 position switch
SW 4/5 or CTRL 9
SW 4/5 or CTRL 9
2 position momentary
contact switch SW 1
contact switch SW 1
proportional speed
control CTRL 6
control CTRL 6
left joystick
trimmer
ON/OFF switch
left touch pad
LC display
right touch pad
trimmer
right joystick
2 position switch SW 3
carrying handle
eyelet for neck strap
3 position switch
SW 6/7 or CTRL 10
proportional speed control CTRL 8
2 position switch SW 2
2 position switch SW 8
2 position momentary
contact switch SW 9
main status LED