Graupner Hendheld RC 2.4 GHz No. of channels: 12 33124 데이터 시트

36

BIND N/A

OK

"Bind not available"
A receiver has not yet been 
bound to the currently active 
model memory. Briefl y touching 
the 

 key will cause a direct 

jump to the appropriate option.

RF on/off?

OFF

ON

Please select

Please select RF transmission 
"ON" or "OFF".

b a t t e r y
n e e d s
c h a r g i n g

Operating voltage is too low

Fail Safe
setup
t.b.d.

Failsafe has not yet been 
activated

A suitable language fi le 
cannot be found on the 
memory card

Throttle

too

high !

Helicopter throttle joystick or 
limiter too high

Prompt to switch off RF 
transmission
(language fi le can only be 
loaded when RF is switched off)

  Warning  notices

No bound receiver in range

No
pupil
signal

Connection between teacher 
and pupil is interrupted

SD-CARD

INSERT

OK

No SD or SDHC memory card 
in the card slot or card is not 
legible

Is the "wireless teacher/pupil connection" that was 

• 

active when the transmitter was last used to be 
continued, CONT or switched off OFF?

TRAINER

Wireless Link

ACT

INH

After being switched on, the transmitter has not 

• 

been used within the time limit preset in the "Power-
on beep" line of the "Basic Settings" menu, see 
page 227. The message …

Power  on  waning

is active!

… will appear in the screen, the center LED will 
alternately blink red and blue and an acoustic 
warning tone will sound.
If the transmitter continues unused it will 
autonomously switch itself off after one minute.
When battery voltage is too low, a model change is 

• 

blocked for reasons of safety. The screen will show 
an appropriate message.

not  possible  now
voltage  too  low