EVGA GeForce GTX 980 Classified ACX 2.0 04G-P4-3988-KR 사용자 설명서
제품 코드
04G-P4-3988-KR
61
62
附加支援
針對您的EVGA顯示卡，如需任何設定或疑難排解的協助，請參訪我們網站上的服務區:
www.evga.com/support
。在服務區您將可以下載到驅動程式，也可以看到我們為數龐大的資料庫，
並對技術上或使用者服務方面提出諮詢。請至EVGA討論區，網址如下:
www.evga.com/forums
。
另外一種方式，透過電話即可聯絡我們。在聯絡客服之前，請先詳細參閱使用說明。若您必須聯絡客服以解決問題，
請在確認我們產品型號&序號時同時確認系統組態。在技術人員協助你之前，您需要先註冊您的產品。您可在
www.evga.com/register
完成網路註冊。
• 電話服務時間：(9:00AM ~18:00PM)
• 電話服務：0800-282868
• 技術支援網站:
www.evga.com.tw/support
產品規範聲明
Macrovision
聲明
註冊商標資訊
FCC Compliance Information
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference, and this device must accept any interference received, including interference that may
cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Increase the separation between the equipment and signal source. Connect the equipment to an outlet on a circuit different from that to
which the signal source is connected.
Consult the dealer or an experienced computer technician for help. The use of shielded cables for connection of the monitor to the graphics
card is required to ensure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference, and this device must accept any interference received, including interference that may
cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Increase the separation between the equipment and signal source. Connect the equipment to an outlet on a circuit different from that to
which the signal source is connected.
Consult the dealer or an experienced computer technician for help. The use of shielded cables for connection of the monitor to the graphics
card is required to ensure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
CE Compliance Information
EMC Directive 89/336/EEC and Amendment 92/31/EEC, Class B Digital Device EN 50081-14, Generic Emissions Standard for Residential,
Commercial and Light Industrial Products (EN 55022/CISPR 22, Limits and Methods of Measurement of Radio). (EN 55022/CISPR 22,
Limits and Method of Measurement of Radio Interference Characteristics Information Technology Equipment) Warning: This is a Class B
product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate
measure. EN 50082-1, Generic Immunity Standard for Residential, Commercial and Light Industrial Products (IEC 801-2, IEC 801-3, IEC
801-4)
EMC Directive 89/336/EEC and Amendment 92/31/EEC, Class B Digital Device EN 50081-14, Generic Emissions Standard for Residential,
Commercial and Light Industrial Products (EN 55022/CISPR 22, Limits and Methods of Measurement of Radio). (EN 55022/CISPR 22,
Limits and Method of Measurement of Radio Interference Characteristics Information Technology Equipment) Warning: This is a Class B
product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate
measure. EN 50082-1, Generic Immunity Standard for Residential, Commercial and Light Industrial Products (IEC 801-2, IEC 801-3, IEC
801-4)
This product may incorporate copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use
of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
©2001-2015 All rights reserved. The manual is the property of EVGA corp. and is protected by copyright, trademark and other intellectual
property laws, and no part may be reproduced, transmitted, stored or translated into any other computer or foreign language without the
express prior written permission of EVGA corp. EVGA Corp. EVGA, the EVGA logo and combinations thereof are trademarks of EVGA Corp.
All brands and companies are trademarks of registered Trademarks of their respective companies and may not be used without permission.
All other trademarks are the property of their respective owners. The information contained in this manual may be subject to change without
notice. EVGA reserves the right to terminate this license if there is a violation of its terms or default by the Original Purchaser. Upon
termination, for any reason, all copies of the Software must be immediately returned to EVGA and the Original Purchaser shall be liable to
EVGA Corp. for any and all damages suffered as a result of the violation or default. The information contained herein is subject to change
without notice and is provided “AS IS” without warranty of any kind (express or implied). Users are advised to obtain the latest version of
relevant information to verify that information being relied on is current and complete.
property laws, and no part may be reproduced, transmitted, stored or translated into any other computer or foreign language without the
express prior written permission of EVGA corp. EVGA Corp. EVGA, the EVGA logo and combinations thereof are trademarks of EVGA Corp.
All brands and companies are trademarks of registered Trademarks of their respective companies and may not be used without permission.
All other trademarks are the property of their respective owners. The information contained in this manual may be subject to change without
notice. EVGA reserves the right to terminate this license if there is a violation of its terms or default by the Original Purchaser. Upon
termination, for any reason, all copies of the Software must be immediately returned to EVGA and the Original Purchaser shall be liable to
EVGA Corp. for any and all damages suffered as a result of the violation or default. The information contained herein is subject to change
without notice and is provided “AS IS” without warranty of any kind (express or implied). Users are advised to obtain the latest version of
relevant information to verify that information being relied on is current and complete.
問題: 遊戲當機或是遊戲錯誤跳回桌面。
解決方案: 確認已安裝所有需要的硬體驅動程式，包含晶片驅動程式、音效卡及顯示卡驅動程式，並且都為最新版
本。重新安裝最新版本的DirectX(於EVGA安裝光碟中)或試著重新安裝該遊戲。 另外確認已安裝所有由軟體開發商/
製造商所提供的遊戲更新檔。
問題: 我可以在哪裡下載顯示卡的最新驅動程式？
解決方案: 您可在
www.evga.com/support/drivers
找到最新驅動程式。
注意: 請至EVGA知識庫
www.evga.com/faq
查詢未列出的問題 。
問題: 當我在電腦觀看高畫質電視，部分或全部桌面會不見，例如Windows工具列不見、或超出螢幕範圍。
解決方案: 首先，先確認您選擇正確的顯示解析度。如果您選擇正確的解析度，嘗試去調整” Resize Desktop”
功能。這可輔助高畫質電視 overscan即能看見整個桌面。若要觀看超出螢幕範圍的畫面，NVIDIA建議您使
用”Overscan”功能調整。您能從NVIDIA panel中電視設定頁面中操作Overscan。
為您量身設計的保固方案
EVGA 產品享有3年保固。更多的保固訊息請至
www.evga.com/support/warranty
。
問題: 內建圖型顯示器功能未在安裝新顯示卡前關閉，或者先前安裝的驅動程式未正確移除 。
原因: 您在安裝PCI顯示卡前沒有先停用內建顯示介面卡，或是尚未將您先前使用的顯示介面卡驅動程式解除安裝。
解決方案: 在安裝新顯示卡前請務必至主機板BIOS設定或是Windows裝置管理員下停用內建顯示介面卡，並至
Windows控制台將原先使用的驅動程式解除安裝。安裝完新顯示卡後，接上您的螢幕，如有需要，在開機前將顯示卡
接上補充電源。
繁體中文
繁體中文