Samsung BN59-01012A 데이터 시트

Shooting Functions

Shooting Functions

Shooting Functions

To capture a realistic photo of a subject, the amount of light should be 
constant. When the light source varies, you can use a flash and supply a 
constant amount of light. Select appropriate settings according to a light 
source and a subject.

In Shooting mode, press [m] 

ĺ

 b 

ĺ

 Flash 

ĺ

 



an option.

Off: The flash is off.

Smart Flash: The camera automatically adjusts the brightness 
of the flash according to the amount of light in the surrounding 
environment.

Auto: The flash automatically fires in dark locations.

Auto Red-eye: The flash automatically fires and reduces red-eye.

Fill-in: The flash fires whenever you capture a photo. (Brightness is 
automatically adjusted.)

Fill-in Red: The flash fires whenever you capture a photo and 
reduces red-eye.

1st Curtain: The flash fires 
immediately after the shutter opens. 
The camera captures a photo of a 
subject earlier in an action sequence 
clearly.

Direction of ball's motion

2nd Curtain: The flash fires just 
before the shutter closes. The 
camera captures a photo of a 
subject later in an action sequence 
clearly.

Direction of ball's motion

Hi-speed: If the shutter speed is faster than the camera’s sync 
speed (the shortest time taken to open and close the shutter), the 
flash will fire multiple times at high speed. The flash starts to fire 
while the shutter opens. This option can be set only when you 
attach a compatible, optional external flash. (SEF-580A)

‡

The available options may differ depending on shooting conditions.

‡

When you use Red-eye correction, there is an interval between two bursts of 
the flash. Do not move until the flash fires a second time.

‡

If you select Off, the flash does not fire even when an external flash is 
attached. If you adjust the flash intensity manually, the flash will fire once 
without a pre-flash.

Use only Samsung-approved flashes. Using incompatible flashes may damage 
your camera.