Ositech comm 614006-001 사용자 설명서
3 - 4
Trumpcard Ethernet LAN
Section Three
6. Type
PCCONFIG
and select ‘Network Card Settings’ and then
select ‘NDIS Ethernet’.
7. At the ‘PROTOCOL.INI’
bindings prompt type
OSITECH_NIF
and press [F10] to save and press [ESC] to return to main
menu.
menu.
8. Select ‘Login Environment Settings’, then select ‘Default
Communications driver’, then select ‘NDIS Ethernet’. Press
[ESC] to return to main menu and [F10] to save.
[ESC] to return to main menu and [F10] to save.
Note:
Keyword specifications associated with the NDIS driver are explained
in Appendix B, Error Messages in Appendix C.
DEC PATHWORKS
To install DEC PATHWORKS version 4.1 on a DOS NDIS workstation, you
can use the automated installation provided with PATHWORKS for the
Ositech Trumpcard NDIS device driver.
can use the automated installation provided with PATHWORKS for the
Ositech Trumpcard NDIS device driver.
1. Install DEC PATHWORKS using the instructions
provided in the DEC PATHWORKS manual.
2. In order to set up the Trumpcard Network adapter for use with
DEC PATHWORKS, please run the PATHWORKS Network
setup software. (i.e. NETSETUP).
setup software. (i.e. NETSETUP).
3. Choose ‘Ethernet controller type’ and select ‘Other NDIS’.
4. Insert the Trumpcard driver diskette into drive A.
5. When prompted for the path to the driver file, type :
A:\DOS\OTCETH.DOS
6. When prompted for the path to the
PROTOCOL.INI
file, type:
A:\DOS