Ositech comm 614006-001 사용자 설명서

4 - 2

Trumpcard Ethernet LAN

Section Four

APPENDIX A – ODI Keywords

The following ODI keywords are supported by the Trumpcard ODI
drivers. The keywords must be in the NET.CFG file under the line LINK
DRIVER OTCETH and must be indented in by at least one space. If the
keyword is not present, the default value shown will be assumed.

Description: Frame type used by the driver

Default: Ethernet_802.2

Accepted values: Ethernet_802.3 ,  Ethernet_II , Ethernet_SNAP,

Ethernet_802.2

Note:

Make sure the frame type matches that used by the server.

Description: Media type selected by the driver

Default: AUTO

Accepted Values: 10BASE2  or BASE2, 10BASET  or BASET, AUTO

Note:

If you are using the dual media Trumpcard network PC Card, setting

this keyword to 10Base2 or 10BaseT will force that media type
connection only. By default, the driver will try to determine which
media is connected by first trying 10BaseT, and then 10Base2.

Description: Put Trumpcard in LAN only mode

Default: Multi-mode

Note:

If the Trumpcard is a multi-function card, specifying this keyword will

disable the other function as long as the network driver is loaded. If
the other function is already in use the driver will report an error.

Description: Disable link poll mode

Default: Enable link