Wadia Digital 860 사용자 설명서

다운로드
페이지 20
WADIA  860 COMPACT DISC PLAYER
Unpacking
Q
Accessories
Q
Unlocking the
Transport Mechanism
Q
Installing the
Spiked Feet
Q
INSTALLATION AND SET-UP
Use care in unpacking your Wadia 860 Compact Disc Player. inspect it for
any shipping damage and call your dealer immediately if any is found.
Do not plug your Wadia 860 Compact Disc Player into an
AC outlet if you find shipping damage.
We advise saving all packing materials so that the unit can be easily and
safely shipped if the need arises.
Provided with the Wadia 860 are the following accessories:
AC power cord
Four spiked feet with threaded studs
Four steel coasters
RCA/BNC  adapter
Transport Key (for locking/unlocking transport)
Remote Control
Three type AAA batteries
Do not tip the unit onto the back panel.
This can 
damage input and/or output connectors.
Place the Wadia 860 Compact Disc Player on its side on a surface that will
not scratch the side panel. Use the key found in the accessories kit to
unlock the transport laser assembly as shown on the label on the bottom
of the unit. (Note: the transport key need on/y be turned a small distance
to either lock or unlock the transport.)
In the event that the unit requires shipping, the unit must be returned
to the locked position.
With the unit still positioned on its side, screw one of the spiked feet into
the bottom of each corner post.
Position the Wadia 860 where you would like it to reside in your system.
We recommend choosing a solid, non-resonant, level, surface for best
performance. If this surface is susceptible to damage, place one of the
steel coasters under each spiked foot.
When positioning the Wadia 860, do not tilt the unit forward as it may
cause the laser assembly to become lodged in the disc clamping system.
4