BMW 2015 Z4 sDrive35is 사용자 매뉴얼

Before installing a child restraint fixing system,
move the passenger seat as far back and as
high as possible to obtain the best possible
position for the belt.

1.

Adjust the backrest width to its widest set‐
ting, refer to page 

2.

Install the child seat.

Backrest width for the child seat
Before installing a child restraint fixing

system in the front passenger seat, the back‐
rest width must be opened completely. Do not
change the adjustment after this; otherwise,
the stability of the child seat will be reduced.◀

The safety belt for the passenger can be
locked to prevent it from being pulled out when
it is used to secure child restraint systems.

1.

Secure the child restraint fixing system
with the belt.

2.

Pull out the belt webbing completely.

3.

Allow the belt webbing to be pulled in and
pull it taut against the child restraint fixing
system.

The safety belt is locked.

1.

Open the belt buckle

2.

Remove the child restraint fixing system.

3.

Allow the belt webbing to be pulled in com‐
pletely.

For Canadian Customers only
The following statement is required by Trans‐
port Canada
This vehicle is not equipped with user-ready
tether anchorages. As such neither a child re‐
straint system, nor a booster cushion, requiring
the use of a tether strap can be properly se‐
cured in the vehicle.

Seite 56

56

Online Edition for Part no. 01 40 2 954 104 - II/15