Horizon Fuel Cell Technologies Automobile Parts 180-1010 사용자 설명서

 

18

Installation 

Manual 

          

FASS FUEL SYSTEM 

STEP 5: 

Use the following photo to complete 

 

 

 

 

 

 

 

this step. 

 

 

 

1. 

Connect the male end of the wire harness to the female electrical connector on 
the FASS System.

  

 

2. 

Route the wire harness along the frame rail and into the engine compartment 
and connect the wire extension (part #WE-1001) to the female end of the WH-
1002.cab. 

 

3. 

Rout the red wire of the wire extension through rubber grommet located in the 
fire wall.

 

 

4. 

Using the fuse tap & flag terminal connect the “Red” lead from the wire 
extension to a terminal on the circuit breaker board that is “hot” when the key is 
on. Note: Connect the fuse tap to the hot side of the fuse. 

 

5. 

Using the ring terminals connect the green wire, of the WH-1002 wire harness, 
to the negative post and the red wire to the positive post of the battery. 

 

 
6. 

Secure the relay in an upright position.

 

 
7. 

Properly secure the wire harness and fuel lines with wire ties.