HP B.06.X 사용자 설명서

Installing and Configuring PPU Software

Installing PPU Software

Chapter 3

Step 4. Mount the drive to the desired directory. The following example uses the

/dev/dsk/c1t2d0

device file (from

Step 2

, above) and the

/cdrom

directory. To mount the drive, enter a similar command as:

Mount Example:

mount -r /dev/dsk/c1t2d0 /cdrom

Step 5. Install the PPU B.06.x bundle

T2351AA

from the OE CD/DVD:

swinstall -s /cdrom T2351AA

Step 6. Continue with “Configuring PPU Software” on page 29.

For HP-UX 11i v1 or 11i v2 - Installing from the AR
Media

Follow this procedure to install the PPU B.06.x software on your HP-UX
11i v1 or 11i v2 system:

Step 1. Log in as

root

Step 2. Determine the CD/DVD drive device file by entering the following

command:

ioscan -fnC disk

Step 3. Insert the Applications Software CD/DVD into the drive.

Step 4. Mount the CD/DVD drive to the desired directory. The following example

uses the