Hughes Satellite IP Modem R-BGAN 사용자 설명서
Note: If you are in an overlap region of the satellite’s coverage, the pointing screen will show
two satellites, two compass directions, and two antenna angles.
two satellites, two compass directions, and two antenna angles.
Antenna Pointing Screen – Satellite Overlap Region
Try pointing to the IOR satellite first and check the signal quality meter as you point the antenna
following Steps 7-8. Do not exit antenna pointing at this point in time. Next try pointing to the
AOR satellite and again check the signal quality meter as you point the antenna following Steps
AOR satellite and again check the signal quality meter as you point the antenna following Steps
7-8. Pick the satellite with the highest signal quality reading and then re-point the antenna
following Steps 7-8. Once this is complete, you can proceed to Step 9 and Exit Pointing. If the
network is not acquired after exiting pointing, reboot the modem and try pointing to the other
network is not acquired after exiting pointing, reboot the modem and try pointing to the other
satellite.
R-BGAN Satellite IP Modem User Manual
12