M-S Cash Drawer A794 사용자 설명서

Chapter 6: Programming Information

A794 Owner’s Guide

December 1999

86

ESC E n

1B 45 n

27 69 n

0 (bit 0) not selected
1 (bit 0) selected

(When 0 and 1 are the Least Significant Bit, LSB)

0-255

0 (Off)

Starts or stops emphasized printing. The printer is reset to the standard Print Mode
after a Clear Printer (0x10) command is received.

Only the lowest bit of n is effective.
Emphasized printing cannot be used with bit-images or downloaded bit-images.

This command and the Select Print Mode(s) command (1B 21) function identically. They
should have the same setting when used together.

In A793 Emulation, this command is unrecognized and the parameter byte is put into
the print buffer.

ESC G n

1B 47 n

27 71 n

0 = Off
1 = On

(When 0 and 1 are the Least Significant Bit, LSB)

0 (Off)

Turns double strike mode on or off. Identical to Emphasized mode. The printer is reset
to the standard Print Mode after a Clear Printer (0x10) command is received.

Only the lowest bit of n is effective. The settings do not apply in Page Mode. However
they can be set or cleared in Page Mode.

Double-strike printing cannot be used with bit-images or downloaded bit-images.

This command and the Select Print Mode(s) command (1B 21) function identically. They
should have the same setting when used together.

In A793 Emulation, this command is unrecognized and the parameter byte is put into
the print buffer.