Dodge Automobile Accessories TA0 - TA3 전단
INSTALLATION
Where space contraints prevent installing the breather in vent
locations 5 for Position E or location 6 for Position F (see Figure
1), install vertical breather kit in location 2 for Position E or location
4 for Position F.
4 for Position F.
Figure 1–Reducer Mounting Positions
Table 1 - Parts for Vertical Breather Kit
Table 1–Parts for Vertical Breather Kit
Figure 2 – Vertical Breather Kit Assembly
Refer to Table 1 for Dodge replacement part numbers and
pardescriptions.
Refer to Table 1 for Dodge replacement part numbers
and part descriptions.
and part descriptions.
* Refer to Figure 2.
** Two lengths of pipe nipple are provided. Only one is required. Use length best suited to application and discard the other.
** Two lengths of pipe nipple are provided. Only one is required. Use length best suited to application and discard the other.
*** Not shown. This part is used only on TA4 – TA12 reducers to adapt 3/4 NPT hole to 1/2 pipe nipple.
Qty.
Ref. No*
Part Description
Part No.
TA0–TA3 (900112)
TA4–TA12 (904112)
1
Air Vent Assembly TAO - TA3
241237
1
---
Air Vent Assembly TA4 TA12
245237
---
1
2
3/8 Pipe Coupling
A31484
1
---
1/2 Pipe Coupling
A45622
---
1
3
3/8 x 90°Street Ell
A38815
1
---
1/2 x 90° Street Ell
A38817
---
1
4**
3/8 x 1 1/2 Pipe Nipple
A38847
1
---
1/2 x 1 1/2 Pipe Nipple
A38845
---
1
5**
3/8 x 3 Pipe Nipple
A31570
1
---
1/2 x 3 Pipe Nipple
304596
---
1
6***
3/4 x 1/2 Hex Bushing
430079
---
1
WARNING: To ensure that drive is not unexpectedly started,
turn off and lock out or tag power source before proceeding.
Remove all external loads from drive before removing or
servicing drive or accessories. Failure to observe these
servicing drive or accessories. Failure to observe these
precautions could result in bodily injury.