BMW 520D 사용자 설명서

 95

The second value in each case applies when 
towing a trailer.
0 / 1 = 1 to 2 persons without luggage
1 / 1 = 5 persons without luggage
1 / 2 = 5 persons with luggage
2 / 2 = 1 person, luggage compartment full
Comply with rear axle load limit, see page

 

onwards.

All load conditions: 

0. 

Exception: 1 person, load area full and with a 
trailer being towed: 

1.

Comply with rear axle load limit, see page

 

onwards.

The headlight beam throw is regulated auto-
matically, e.g. when accelerating and braking 
and to adapt to the different loads being carried.

1 High-beam headlights
2 Headlight flasher
3 Parking lights

There is an additional option of switching on the 
lights on the side of the car facing the road 
when parked, if permitted in the country of use:
Once you have switched the engine off, push 
the lever beyond the pressure point in the cor-
responding direction

3.

The parking lights will drain the battery. 
Do not leave them switched on for too 

long, otherwise the engine may fail to start.

<

This system switches the high-beam head-
lights on and off automatically. The process is 
controlled by a sensor on the front of the inside 
mirror. The assistant ensures that the high-
beam headlights are switched on whenever 
permitted by the situation in which the car is 
being driven. This relieves the load on you the 
driver and optimises your view of the road. You 
can of course intervene at any time and switch 
the high-beam headlights on and off in the 
usual way.

1.

Turn the illumination switch to switch 
position

1, see page

.

2.

With the low-beam headlights switched on, 
briefly press the flashing turn indicator lever 
towards high-beam headlights.

Online Edition for Part-No. 01 41 0 159 725 © 09/05 BMW AG