BMW 2007 M6 Convertible 사용자 매뉴얼
223
Tow-starting
Do not tow-start the vehicle if possible, but
instead start the engine by means of jump start-
ing, refer to page
instead start the engine by means of jump start-
ing, refer to page
. With a catalytic con-
verter, the vehicle should only be tow-started
with the engine cold.
with the engine cold.
Manual transmission
1.
Switch on the hazard warning flashers,
comply with country-specific regulations.
comply with country-specific regulations.
2.
Switch on the ignition, refer to page
.
3.
Shift into 3rd gear.
4.
Tow-start with the clutch completely
depressed and slowly release the clutch.
After the engine starts, immediately
depress the clutch again completely.
depressed and slowly release the clutch.
After the engine starts, immediately
depress the clutch again completely.
5.
Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
bar or rope and switch off the hazard warn-
ing flashers.
6.
Have the vehicle checked.
Sequential Manual Transmission with
Drivelogic
Drivelogic
1.
Switch on the hazard warning flashers,
comply with country-specific regulations.
comply with country-specific regulations.
2.
Switch on the ignition, refer to page
.
3.
Tow-start in selector lever position N.
4.
Move the selector lever into the drive posi-
tion and pull toward + within 2 seconds.
The correct gear will be selected and
engaged automatically.
tion and pull toward + within 2 seconds.
The correct gear will be selected and
engaged automatically.
5.
Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
bar or rope and switch off the hazard warn-
ing flashers.
6.
Have the vehicle checked.
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG