Multiquip Pet Fence mtr-40hs 사용자 설명서

2. The rammer should be greased with three shots of grease

after each eight (8) hours of use.

3. Use MQ HIGH TEMPERATURE GREASE, P/N GRS2 or its

equivalent.

4. Equivalent greases include Shell Darina or Texaco

Thermatex, both of which have a bentone base and EP-2
rating.

5. If an inferior grease is used, it may become too thick or too thin

due to changes in temperature, and improper lubrication
could result.

1. When transporting the machine, carry it by the grip handle

located on the body (Figure 3).

1. This rammer is equipped with a two-cycled gasoline engine.

Use only unleaded gasoline. High test ethyl gasoline 

2.  If fuel is low, remove the fuel filler cap (Figure 4) and fill with

only 

unleaded gasoline. Motor fuels are highly flammable

and can be dangerous if mishandled. DO NOT smoke while
refueling. DO NOT attempt to refuel the pump if the engine
is 

hot! or running.

This section is intended to assist the
operator with the 

pre-inspection of

the 

MTR-40HS  Tamping  Rammer. It

is extremely important that this section
be 

read carefully before attempting

to operate the rammer.

DO NOT use your rammer until this section is thoroughly
understood.

Inspection
■ Check all nuts, bolts fasteners for tightness. Retighten as

necessary.

■ Clean any dirt from the recoil  starter and  engine cooling fins.

Wipe the entire rammer clean before operating.

■ Replace any missing or damaged Safety Operation decals.

Failure to understand the operation of the 

40HS Tamping  Rammer could result in severe
damage to the rammer or personal injury.

1. Check the engine oil level at the sight gauge located on the

operator's side of the 

oil tank  (Figure 5).  Fill the oil tank to

the "H" level using only outboard (2-stroke) oil.  Replenish the
oil regularly before the oil level reaches the "L" level of the
oil tank.

2. Make sure the oil hose is not pinched  or squeezed .  A sensor

detects lack of oil and shuts down the engine automatically.

3. Remember low levels of engine oil may result in engine

seizure due to high levels of consumption during operation.
Always check oil regularly.