Boss Audio Systems Car Stereo System 625UAB 사용자 설명서
Common operation:
1. To turn the unit on/off .
When the unit is power Off, it may be switched On by pressing any button except
RELEASE button.
When the unit is switched On, press and hold POWER button for more than 0.5
seconds, to switch the power off.
RELEASE button.
When the unit is switched On, press and hold POWER button for more than 0.5
seconds, to switch the power off.
2. To select function mode
Press SRC button to change function mode as follows:
-->TUNER -->USB(after inserting USB stick)-->CARD(after inserting SD card)-->BT-->
-->TUNER -->USB(after inserting USB stick)-->CARD(after inserting SD card)-->BT-->
AUX-->
When there is no media (USB/CARD), that mode will be skipped.
3. To adjust the volume level
Rotate VOL knob or press + or - button on remote control to adjust volume level during
playback.
playback.
4. To mute or resume sound
Press MUTE or MU button to eliminate or resume sound immediately during playback.
To resume the sound immediately, you can rotate VOL knob.
To resume the sound immediately, you can rotate VOL knob.
5. To set sound mode and menu
1).To set sound mode:
1).To set sound mode:
Press SEL button shortly and repeatedly to select mode of VOL(volume), BASS
(without preset DSP), TRE(treble)(without preset DSP), BAL(balance) and FAD
(fader) in the sequence and circulation. In each mode, the waiting time is about 5
seconds, and when the waiting time is over, it will return to the last display mode.
(without preset DSP), TRE(treble)(without preset DSP), BAL(balance) and FAD
(fader) in the sequence and circulation. In each mode, the waiting time is about 5
seconds, and when the waiting time is over, it will return to the last display mode.
After selecting a sound mode, use volume control to set level of the selected sound
mode.
2).To set menu:
Press SEL button and hold for more than 2 seconds to turn on BEEP ON/BEEP OFF,
then press SEL button shortly and repeatedly to select USER SET (FLAT/CLASSIC/
ROCK/POP), VOL LAST/VOL DEFA(AVOL) , AMERICA3/EUROPE(in RADIO mode),
STEREO/MONO(in RADIO mode), LOUD OFF/LOUD ON, DX/LOCAL(in RADIO mode)
mode. After selecting a desired item, use volume control to set.
then press SEL button shortly and repeatedly to select USER SET (FLAT/CLASSIC/
ROCK/POP), VOL LAST/VOL DEFA(AVOL) , AMERICA3/EUROPE(in RADIO mode),
STEREO/MONO(in RADIO mode), LOUD OFF/LOUD ON, DX/LOCAL(in RADIO mode)
mode. After selecting a desired item, use volume control to set.
3) BEEP ON/BEEP OFF
BEEP ON mode: The beep is generated when any key is pressed.
BEEP OFF mode: The beep sound is disabled.
BEEP OFF mode: The beep sound is disabled.
4) VOL LAST/VOL DEFA
VOL LAST: The volume level when switching off will be restored with power On.
VOL DEFA: The volume level of the main unit after power on is a constant value.
when selecting VOL DEFA item, press SEL button to display AVOL , then
you can pre-set the constant volume level after power on with VOL control.
VOL DEFA: The volume level of the main unit after power on is a constant value.
when selecting VOL DEFA item, press SEL button to display AVOL , then
you can pre-set the constant volume level after power on with VOL control.
6. ID3 FUNCTION
In USB/CARD mode, during playback, if you press DISP button or DSP button on remote
control then the information of the songs title, artist, etc will display on the LCD. As long as
the current playing music contains relevant ID3 tag information. Press again to cancel the
ID3 function.
In USB/CARD mode, during playback, if you press DISP button or DSP button on remote
control then the information of the songs title, artist, etc will display on the LCD. As long as
the current playing music contains relevant ID3 tag information. Press again to cancel the
ID3 function.
Page 3
Page 8
INSTALLATION METHOD
This is an anti-theft installation method. The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna according to
the requirements of this Instruction Manual, then install the metal mounting sleeve into the car
as per the diagram illustrated below.
the requirements of this Instruction Manual, then install the metal mounting sleeve into the car
as per the diagram illustrated below.
To boost up the cap ability of anti-jamm ing,
please make sure fix tightly the metal support
strap into the metal joint that co nnect to the
chass is of the car.
please make sure fix tightly the metal support
strap into the metal joint that co nnect to the
chass is of the car.
METAL SUPPORT STRAP
UNIT CHASSIS
Bend the tabs on the metal mounting
sle eve ag ainst the DASHBO ARD with
a s crewdriver
sle eve ag ainst the DASHBO ARD with
a s crewdriver
DASHBOARD
METAL MOUNT ING SLEEVE
FIXED FACEPLATE
To remo ve the unit out of the meta l mounting sleeve,
in sert th e two supplied KEYS into the left and right side
slots of the chassis at the same time. Then pull the c hassis
ou t of th e meta l mounting sleeve as sho wn in the right
illustration.
in sert th e two supplied KEYS into the left and right side
slots of the chassis at the same time. Then pull the c hassis
ou t of th e meta l mounting sleeve as sho wn in the right
illustration.
FRONT PANEL
PLASTIC TRIM RING
PDF created with FinePrint pdfFactory trial version