BMW 2010 M6 Convertible 사용자 매뉴얼
41
4.
Raise the two convertible top ends as far as
possible, arrow
possible, arrow
5, and close the convertible
top compartment lid, arrow
6.
5.
Fold the top ends down onto the convert-
ible top compartment lid.
ible top compartment lid.
6.
From the interior, take out the cover in the
center of the front top frame; use a screw-
driver if necessary.
center of the front top frame; use a screw-
driver if necessary.
7.
Insert the Allen wrench into the opening
provided.
provided.
8.
From the outside, both persons pull the
front frame of the convertible top down-
ward, as simultaneously as possible on the
two sides.
front frame of the convertible top down-
ward, as simultaneously as possible on the
two sides.
9.
Turn the Allen wrench in the direction of the
arrow until the front convertible top frame is
locked to the windshield frame.
The rear convertible top ends are automati-
cally pressed onto the convertible top com-
partment lid and close tightly with tension.
arrow until the front convertible top frame is
locked to the windshield frame.
The rear convertible top ends are automati-
cally pressed onto the convertible top com-
partment lid and close tightly with tension.
10.
If necessary, close the rear window again
manually in the same way as above.
manually in the same way as above.
Wind deflector*
The wind deflector keeps the air movement in
the passenger compartment to a minimum
the passenger compartment to a minimum
when the convertible top is open, thus enabling
pleasant driving even at higher speeds.
The wind deflector is stowed in a protective
sleeve in the luggage compartment. Short
instructions for use are also provided on the
protective sleeve.
pleasant driving even at higher speeds.
The wind deflector is stowed in a protective
sleeve in the luggage compartment. Short
instructions for use are also provided on the
protective sleeve.
Before installing
1.
Remove the wind deflector from the protec-
tive sleeve and fold it open, refer to
arrows
tive sleeve and fold it open, refer to
arrows
1.
2.
Press the upper and lower section together
until the locking device engages, refer to
arrow
until the locking device engages, refer to
arrow
2.
3.
Push the securing pin
3 out until it engages.
4.
Unfold the rear mounts
4.
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG