Vivanco 23407 사용자 설명서

  2

 
 

 

 

Thank you for purchasing the Vivanco 10/100 Fast Ethernet Switch. This switch offers you a high-
performance but simple-to-use solution to connect up to 5 PCs within an Ethernet or to create a sub-
network within a large Ethernet. It provides a full 10/100Mbps Ethernet connection at each port. 

 

Ports 1-5:

 

On the back of the Switch you will find five RJ45 ports for connection to your PCs or 

other Ethernet switches/hubs.  

Power connection:  

On the left side of the Switch you will find the power port to connect the power adapter included in the 

package.  To avoid any damage, use only this power adapter and no other. 

 

The five RJ45 UTP/STP ports support the automatic MDI/MDIX crossover detection function to provide 

true ‘plug and play’ capability. With the Auto-MDI function you need only plug the network cable into 

the switch itself and not concern yourself whether the other end of the cable is connected to a Network 

Interface Card or a switch/hub. 

Connect the Switch’s AC power adapter to the Switch’s Power port. Plug the other end of the adapter 

into an AC outlet. When connected, the AC power adapter to the switch’s Power port and AC outlet 

will immediately power on this Switch. 

 

LEDs 

When the Switch installation is completed, check the LED indicators for the status. 
 

POWER 

 

This indicator lights green when the switch is receiving power. 
 

This indicator lights green when the port is connected to a station.  
The blinking indicator shows that this port is transmitting or receiving data on the network.