ADIC Tool Storage 6-00025-01 사용자 설명서
Accessing Storage Devices
2-4
Library List
6-00025-01 Rev A
Element Addressing
Because ADIC does not support source storage element
addressing, the AMASS
addressing, the AMASS
medialist
utility cannot identify the
home storage slot for volumes in a drive.
To identify and return media from a drive to its home storage
slot, perform the following steps:
slot, perform the following steps:
Step 1.
Use the
mediaread
utility to read the slot number
from the label as shown below and display the
output to the screen:
output to the screen:
FastStor 22
You must configure the library as 22 slots with
one Import/Export slot. To create this
configuration with the “Diagnostic Menu” on the
front panel, use the “CFG SLOTS” function.
Access the Diagnostic Menu by pressing and
holding first the NEXT button and then the
MODE button for about 5 seconds.
one Import/Export slot. To create this
configuration with the “Diagnostic Menu” on the
front panel, use the “CFG SLOTS” function.
Access the Diagnostic Menu by pressing and
holding first the NEXT button and then the
MODE button for about 5 seconds.
† If a power outage, hang, or reboot occurs, power off the ADIC
libraries, power on the ADIC libraries, and then run the AMASS
init_element
libraries, power on the ADIC libraries, and then run the AMASS
init_element
utility.
ADIC Scalar
for Tape
†
Caveats
# cd /usr/amass/utils
# mediaread drivenumber 0
# cat /tmp/mediaread
Block number
Display output
to screen
to screen