ADIC Tool Storage 6-00025-01 사용자 설명서
Accessing Storage Devices
2-36
Library List
6-00025-01 Rev A
Step 2.
Place media into the mailbox with the barcode
facing the picker and close the sliding door. The
picker scans the volumes in the mailboxes and
moves the volumes to their home storage slots.
Make sure this completes before going to the next
step.
facing the picker and close the sliding door. The
picker scans the volumes in the mailboxes and
moves the volumes to their home storage slots.
Make sure this completes before going to the next
step.
Unload Tape
Outlet media only when media does not reside in the mailbox.
Step 1.
Use the
bulkoutlet
command to unload and mark
the volume Offline in the AMASS database.
NOTE: If you specify more volumes with the
bulkoutlet
command than the
number of available mailslots, AMASS
waits until all mailslots are cleared
before continuing.
waits until all mailslots are cleared
before continuing.
Step 2.
Remove the media after the library has moved
each volume from its home storage slot to the
mailbox.
each volume from its home storage slot to the
mailbox.
ADIC has found the following situations typically cause
AMASS to hang when you try to remove media or cause an
error that indicates hardware intervention is required:
AMASS to hang when you try to remove media or cause an
error that indicates hardware intervention is required:
•
The I/O port has not closed; manually close it.
•
See if a cleaning cycle has started on the same
drive that AMASS is attempting to dismount.
drive that AMASS is attempting to dismount.