Horstmann C-Stat ZW 설치 가이드
Before fixing the wall plate in position check to see that the
thermostat and receiver are still able to communicate
satisfactorily by turning the thermostat temperature up and
down to switch the ASR-ZW receiver on and off.
thermostat and receiver are still able to communicate
satisfactorily by turning the thermostat temperature up and
down to switch the ASR-ZW receiver on and off.
Offer the plate to the wall in the position where the C-Stat is to be
mounted and mark the fixing positions through the slots in the
wall plate. Drill and plug the wall, then secure the plate into
position. The slots in the wall plate will compensate for any
misalignment of the fixings.
mounted and mark the fixing positions through the slots in the
wall plate. Drill and plug the wall, then secure the plate into
position. The slots in the wall plate will compensate for any
misalignment of the fixings.
Complete installation by swinging the C-Stat into position by
engaging with the lugs at the top of the wall plate before pushing
it carefully home into its plug-in terminal block.
engaging with the lugs at the top of the wall plate before pushing
it carefully home into its plug-in terminal block.
Tighten the 2 captive screws on the underside of the unit.
Now ensure that the heating system is responding to the
ON/OFF commands from the C-Stat and explain its operation to
the householder before handing over the User Instructions.
ON/OFF commands from the C-Stat and explain its operation to
the householder before handing over the User Instructions.
9