Harman Stove Company OAKLEAF 1-90-797000 사용자 설명서

다운로드
페이지 40
2
 Dry Seasoned Wood Only!                                                              3-90-798                                                                 Save These Instructions
Oakleaf Woodburning stove
Hearth & Home Technologies welcomes you to our tradition of excellence! By choosing a Harman appliance, 
you have become part of our commitment to meeting the heating needs of consumers with the most distinctive, 
powerful and responsible home heating products available. 
The Oakleaf has huge features in an elegantly small package. With a heating capacity of 1400 to 1600 ft²,  The 
Oakleaf takes advantage of Harman’s 30+ years of stove design, technology and manufacturing. The Firedome 
secondary combustion system provides for super-clean burning and minimal maintenance. The top-loading feature 
makes for more convenient loading, with enough fuel for an all day burn.
We wish you and your family many years of enjoyment in the warmth and comfort of your hearth appliance.
Thank you for choosing Harman.
Harman
A division of
 
Hearth & Home Technologies, Inc.
352 Mountain House Road
Halifax, PA 17032
www.harmanstoves.com
When This Room Heater Is Not Properly 
Installed, a House fire May Result.  
To Reduce The Risk Of fire, follow 
The Installation Instructions.  Contact 
Local Building Or fire Officials About 
Restrictions And Installation Inspection 
Requirements In your Area.
This Label is located on the rear of the appliance. It contains important safety test information as well as the 
clearances to combustible materials. The label also contains the appliance serial number. For your records, 
copy your serial number and purchase date here.
Serial #: ________________________  
 
Date of Purchase: ________________________
Report #/ Raport # 135-S-26-6.2
Tested to / Testé à: UL1482-10, and ULC S627-00 
Test Date: August 2010
Approved For Use in Mobile/Manufactured Homes- 
USA ONLY
This appliance is also approved for installation into a shop.
“PREVENT HOUSE FIRES”
Install and use only in accordance with manufacturer’s installation and operation instructions 
and local codes. In absence of local codes, installation must meet minimum requirements of 
NFPA 211 in USA. Refer to manufacturer’s instructions and local codes for precautions required 
for passing chimney through a combustible wall or ceiling. 
WARNING FOR MANUFACTURED HOMES: (US Only) Do not install appliance in a sleeping 
room. An outside air inlet must be provided. The structural integrity of the manufactured home’s 
floor, walls, and ceiling must be maintained.
Flue connector pipe must be 6” diameter, minimum 24 MSG blue steel. Chimney must be factory   
                built 103HT or masonry construction.
                Contact Local Building or Fire Officials About Restrictions and Installation       
                Inspection In Your Area.
DO NOT CONNECT THIS APPLIANCE TO A CHIMNEY SERVING ANOTHER APPLIANCE.
FOR USE WITH SOLID WOOD FUEL ONLY Do not burn coal.
DO NOT Overfire - If Heater or chimney connector glows, you are overfiring.
Optional Blower Harman #1-00-797032: Electrical Rating 115 VAC, 60Hz, 1AMP Maximum 
Route power cord away from unit. 
Replace glass only with 5mm ceramic, available from your dealer.
Combustible flooring must be protected with an approved 0.45R hearth board.
Appliance must be installed with the legs attached. Do not obstruct airflow under the appliance.
DANGER: Risk of Fire or Explosion - Do not burn garbage,  gasoline, drain oil or other 
flammable liquids.
WARNING: Risk of Fire 
Do not operate with fuel loading or ash removal doors open. 
Do not store fuel or combustibles within marked clearances.
Inspect and clean chimney and connector regularly- Under certain conditions of use, 
creosote buildup may occur rapidly.
The Bypass Damper must be opened prior to opening any load or ash door.
Do not install a grate or otherwise elevate the fire.
OAKLEAF Woodburning Stove
Poêle Du Bois OAKLEAF
Serial No.
№ de série
008
Rapport no 135-S-26-6.2
Conforme à UL 1482-10 et ULC S627-00
Date d’essai: Aug. 2010
Homologué pour les maisons mobiles et préfabriquées - É.-U. SEULEMENT
Cet appareil est également homologué pour être installé dans un atelier.
«ÉVITEZ LES INCENDIES DE MAISON»
N’installez et n’utilisez cet appareil que selon le mode d’installation et le mode 
d’emploi  du  fabricant  et  les  codes  locaux.  En  l’absence  de  codes  locaux, 
l’installation doit au minimum être conforme aux exigences de la norme NFPA 
211 aux É.-U. Voir dans les recommandations du fabricant et dans les codes 
locaux les précautions quant au passage d’une cheminée à travers un mur ou 
un plafond combustible.
MISE EN GARDE POUR LES MAISONS PRÉFABRIQUÉES : (É.-U. seulement) 
N’installez pas cet appareil dans une chambre à coucher. Une arrivée d’air de 
combustion extérieur doit être prévue. L’intégrité structurelle du plancher, des 
murs et du plafond de la maison préfabriquée doit être maintenue.
Le tuyau de raccord à la cheminée doit être d’un diamètre de 15,25 cm (6 po), 
au  minimum  en  acier  bleu  24  MSG.  La  cheminée  doit  être  en  métal  103HT 
d’usine ou construite en maçonnerie.
NE RELIEZ PAS CE POÊLE À UNE CHEMINÉE QUI SERT POUR UN AUTRE 
APPAREIL.
IL NE FAUT UTILISER QUE DU BOIS EN BUCHES.  Ne chauffez pas TROP. Si 
l’appareil ou le raccord de cheminée rougit, c’est que le feu est trop puissant.
Éloignez le cordon électrique de l’appareil.
DANGER:  Risque  de  décharge  électrique.  Débranchez  la  prise  avant  tout 
entretien.  Pour plus de détails, consultez le mode d’emploi.
Ne remplacez le verre que par du verre céramique de 5 mm à obtenir de votre 
détaillant.
L’appareil doit être installé avec ses pieds fixés. N’obstruez pas le passage d’air 
sous l’appareil.
DANGER:  Risque  d’incendie  ou  d’explosion.  Ne  brûlez  pas  d’ordures, 
d’essence, d’huile de vidange ni aucun autre liquide inflammable.
MISE EN GARDE: Risque d’incendie.
N’utilisez pas le poêle lorsque les portes du foyer et du cendrier sont ouvertes.
Gardez le carburant et les matériaux combustibles 
en dehors des dégagements prescrits.
Inspectez et nettoyez fréquemment les conduits et la cheminée.
J
H
G
Floor Protection 
Requirements
Inches Millimeters
Sides / Côtés
Front- from glass/Devant, par rapport au verre
Rear / Arrière
8             203
 8             203
18            457
CLEARANCE TO COMbUSTIbLES /
 
DISTANCES MINIMALES DE SECURITE:
Date of Manufacture / Date de fabrication:
2010  2011  2012  JAN   FEB   MAR   APR   MAY   JUN   JUL   AUG   SEP   OCT   NOV   DEC
Fabriqué par: Harman Home Heating 352 Mountain House Road, Halifax PA 17032 (É.-U.)
P.N. 3-90-797
IGN
CAUTION:
 
HOT  WHILE  IN  OPERATION.  DO  NOT  TOUCH.  KEEP 
CHILDREN AND CLOTHING AWAY. CONTACT MAY CAUSE SKIN BURNS. 
SEE  NAMEPLATE  AND  INSTRUCTIONS.  KEEP  FURNISHINGS  AND 
OTHER COMbUSTIbLE MATERIALS A CONSIDERAbLE DISTANCE AWAY 
FROM THIS APPLIANCE.
ATTENTION:
 
CHAUD LORS DU FONCTIONNEMENT. NE TOUCHEZ 
PAS L’APPAREIL.GARDEZ LES ENFANTS ET LES VÊTEMENTS ÉLOIGNÉS. TOUT 
CONTACT PEUT ENTRAÎNER DES BRÛLURES DE LA PEAU.  RÉFÉREZ-VOUS À 
LA PLAQUE SIGNALÉTIQUE ET AU MODE D’EMPLOI. GARDEZ LE MOBILIER ET 
LES AUTRES MATÉRIAUX COMBUSTIBLES BIEN À L’ÉCART DE L’APPAREIL.
A C
D
b
E
F
F
C
D
b
A
Parallel 
Installation
Inches Millimeters
Back Wall / Entre mur arriereet l’appareil
Side Wall To Unit / Entre mur lateral et l’appareil
Back Wall To Flue Pipe / Entre  tuyau et le mur arriere
Side Wall To Flue Pipe / Entre tuyau et le mur lateral
14            330
17.5          444
17            432
26.75         679
F
E
Corner 
Installation
Inches Millimeters
Walls to Unit Body / Entre mur adjacent et l’appareil
Walls to Flue Pipe / Entre tuyau et le mur adjacent
14           330
21.75        552
Floor  protection  must  be  a  minimum  3/8” 
(9.5mm) of 0.84k material, or 0.45R. Must also 
be  placed  under  any  horizontal  sections  of 
flue connector, extending 2” (51mm) beyond 
the measurement of the pipe. Use of bottom 
heat shield required on protected floor.
Pour  protéger  le  plancher,  il  faut  sous  le 
poêle  un  matériau  (9.5mm  /  0.84k),  o  0.45R. 
Qui  doit  aussi  être  placé  sous  les  parties 
horizontales  du  tuyau  de  raccord  à  la 
cheminée et s’étendre à 51 mm (2 po) au-delà 
de la mesure du tuyau.
G
G
H
J
15.5”
5.875”
Made in U.S.A. of US and imported parts. / Fabriqué aux États-Unis-
d’Amérique par des pièces d’origine américaine et pièces importées.
E
REFER TO MANUFACTURER’S INSTRUCTIONS 
FOR CLEARANCES WITH ADDITIONAL VENT 
CONFIGURATIONS.