Benq Thermometer SP920P 사용자 설명서

  21

  Connection

Eng
lish

Connecting a Component Video source device

Examine your Video source device to determine if it has a set of unused Component Video output sockets 
available: 
•

If so, you can continue with this procedure.

•

If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a Component Video source device:

The final connection path should be like that shown in the following diagram:

•

With a Component Video cable:

•

With a Component Video to VGA (D-Sub) 
adaptor cable:

1.

Take a Component Video cable and connect the 
end with 3 RCA type connectors to the 
Component Video output sockets of the Video 
source device. Match the color of the plugs to the 
color of the sockets; green to green, blue to blue, 
and red to red.

2.

Connect the other end with 3 RCA type 
connectors to the COMPONENT sockets of the 
projector. Match the color of the plugs to the 
color of the sockets; green to green, blue to blue, 
and red to red.

3.

If you wish to make use of the projector (mixed 
mono) speakers in your presentations, take a 
suitable audio cable and connect one end of the 
cable to the audio output socket of the device, and 
the other end to the AUDIO socket of the 
projector. 
Once connected, the audio can be controlled by 
the projector On-Screen Display (OSD) menus. 
See 

 for details.

1.

Take a Component Video to VGA (D-Sub) 
adaptor cable and connect the end with 3 RCA 
type connectors to the Component Video output 
sockets of the Video source device. Match the 
color of the plugs to the color of the sockets; green 
to green, blue to blue, and red to red.

2.

Connect the other end of the Component Video 
to VGA (D-Sub) adaptor cable (with a D-Sub 
type connector) to the D-SUB/COMP. IN socket 
on the projector.

3.

If you wish to make use of the projector (mixed 
mono) speakers in your presentations, take a 
suitable audio cable and connect one end of the 
cable to the audio output socket of the device, and 
the other end to the AUDIO socket of the 
projector.
Once connected, the audio can be controlled by 
the projector On-Screen Display (OSD) menus. 
See 

 for details.

or