Honeywell Aquastat L8148A 지침 매뉴얼

7

95-6940—12

Improper procedure will damage equipment.
Never apply a jumper across (or short) terminals 

B1, B2, or B3. This burns out the transformer.

Put the system into operation and observe through at 

least one complete cycle to be sure control operates as 
described above.

INSERT CORNER OF SMALL 
SCREWDRIVER IN THIS 
NOTCH AND PRY STOP 
UPWARD FROM DIAL FACE

WHILE HOLDING STOP AWAY
FROM DIAL FACE WITH 
SCREWDRIVER, TURN 
DIAL UNTIL DESIRED HIGH 
LIMIT SETTING IS ALIGNED 
WITH POINTER

RELEASE SCREWDRIVER;
MAKE SURE HIGH-LIMIT
STOP RESTS FLAT
AGAINST DIAL FACE

POINTER

HIGH LIMIT
STOP

DIAL FACE

M8889