Western Telematic WTI NetReach CMS-16 사용자 설명서

RS232 Port Interface:  16 RS232 serial inputs use DB9 connectors configured as DTE
ports.

●   

Network Interface:  10Base-T Ethernet, RJ45

●   

Coding:  Asynchronous, 7/8 bits ASCII.

●   

Parity:  Even, Odd, None

●   

Stop Bits:  1 or 2.

●   

Data Rate:  300 to 115.2K bps (all standard rates).

●   

Flow Control:  XON/XOFF, RTS/CTS, Both, or None.

●   

Timeout:  No activity timeout disconnects port.  1, 5, 10, 15, 30 seconds, 1, 5, 15, 30, 90
minutes.

●   

Memory:  Stores Parameters and captured data. Non-volatile 512K SRAM buffer
memory.  Statically allocated.

●   

Break:  Accept Break or Refuse Break

●   

Option Switch:  8 position DIP switch, selects default settings for baud rate, flow control,
response message format, and command echo.

●   

LEDs:  Power On, Ready, Net, Data Activity for Ports 1 through 16.

●   

Temperature:  0°C to 45°C (operating)

●   

AC Version:  IEC-32 Inlet, 115/230 VAC, 50/60 Hz, 5 watts

❍   

DC Version:  Terminal Strip (#6-32), -48 VDC, 0.2 Amp Max.

❍   

●   

Size:  2.8" x 17" x 6.8" (H x W x D)

●   

Weight:  8 lbs. shipping weight

●   

Humidity:  10 to 90% RH, Non-Condensing

●   

Venting:  Side vents are used to dissipate heat generated within the unit. When mounting
the unit in an equipment rack, make certain to allow adequate clearance for venting.

●   

Appendix C.   Customer Service

Customer Service hours are from 8:00 AM to 5:00 PM, PST, Monday through Friday.  When
calling, please be prepared to give the name and make of the unit, its serial number and a
description of its symptoms.  If the unit should need to be returned for factory repair it must be
accompanied by a Return Authorization number from Customer Service.

WTI Customer Service

5 Sterling

Irvine, California   92618

949-586-9950

Toll Free:  1-800-854-7226

Email: