Bunn Dual GPR DBC 사용자 매뉴얼

Page 8

1.  The use of a damp cloth rinsed in any mild, nonabrasive, liquid detergent is recommended for cleaning all 

surfaces on Bunn-O-Matic equipment.

2.  Check and clean the sprayhead. Use the pointed end of sprayhead cleaning tool (#38227.0000) to remove 

any mineral deposits from the sprayhead holes.

3.  Insert the long end of sprayhead cleaning tool into the sprayhead fitting, and rotate several times to remove 

any mineral deposits from the fitting.

4.  Insert the short end of sprayhead cleaning tool into the bypass fitting, and rotate several times to remove 

any mineral deposits from the fitting.

NOTE: In hard water areas, this may need to be done daily. It will help prevent liming problems in the brewer 

and takes less than a minute.

37614.1 031512