Brother XL-3027 사용자 매뉴얼
SEWING THE STITCHES
U
tility
S
S
titc
h
h
es
Sewing S-37
S
2
■ Piecing Using the 1/4" Quilting Foot
with Guide (optional with some
models)
models)
This quilting foot can sew an accurate 1/4 inch or
1/8 inch seam allowance.
It can be used for piecing together a quilt or for
topstitching.
1/8 inch seam allowance.
It can be used for piecing together a quilt or for
topstitching.
a
Press
, and then attach the 1/4” piecing
foot with guide.
a Guide
b
Use the guide and marks on the presser foot
to sew accurate seam allowances.
to sew accurate seam allowances.
Piecing a 1/4 inch seam allowance
Sew keeping the edge of the fabrics against the guide.
Sew keeping the edge of the fabrics against the guide.
a Guide
b 1/4 inch
Creating an accurate seam allowance
Use the mark on the foot to begin, end, or pivot 1/4
inch from edge of fabric.
Use the mark on the foot to begin, end, or pivot 1/4
inch from edge of fabric.
a Align this mark with edge of fabric to begin.
b Beginning of stitching
c End of stitching
b Beginning of stitching
c End of stitching
d Opposite edge of fabric to end or pivot
e 1/4 inch
e 1/4 inch
Topstitching quilting, 1/8 inch
Sew with the edge of the fabric aligned with the left
side of the presser foot end.
Sew with the edge of the fabric aligned with the left
side of the presser foot end.
a Surface of fabric
b Seam
c 1/8 inch
b Seam
c 1/8 inch
Memo
• Using a straight stitch (middle needle
position) makes it easier to sew smoothly
(see page S-24).
(see page S-24).
• For models equipped with the guideline
marker:
In the case Q-01(center, at width 3.5 mm) is
selected, if the guideline marker is set at
10.0 mm (3.5 mm plus 6.5 mm, close to 1/4
inch), you can sew piecing with referring the
guideline marker.
In the case Q-01(center, at width 3.5 mm) is
selected, if the guideline marker is set at
10.0 mm (3.5 mm plus 6.5 mm, close to 1/4
inch), you can sew piecing with referring the
guideline marker.
Memo
• For accurate fabric placement, refer to
“Aligning the Fabric with a Mark on the
Needle Plate or Bobbin Cover (with Mark)”
on page S-26.
Needle Plate or Bobbin Cover (with Mark)”
on page S-26.
a
a
b
Memo
• For details on pivoting, refer to “Pivoting”
on page S-15.
a
e
e
c
d
b
a
b
c