Brother LX-1200 빠른 설정 가이드
- 20 -
Manual feeding and manual cutting
You can manually feed and cut the document using the Cool Laminator.
(1)
Place the document in the document tray.
(2)
Press the Feed button to feed the document
manually. The Feed button is a self-repeating
key. The document will continue to be fed until
the Feed button is released. Keep pressing the
Feed button until you see the end of the
document.
manually. The Feed button is a self-repeating
key. The document will continue to be fed until
the Feed button is released. Keep pressing the
Feed button until you see the end of the
document.
(3)
Press the Cut button. The document will be cut at
its current position.
its current position.
Note
-For safety, the exact cutting position is not
-For safety, the exact cutting position is not
visible from outside of the machine.
-To avoid accidentally cutting through your
document, it is recommended that you press
the Cut button only after the document has
been completely ejected from the machine.
the Cut button only after the document has
been completely ejected from the machine.
-Never remove a document from the machine
by force. If necessary, use scissors.