Beurer PM70 작동 가이드
48
On the middle line, the date of your last fitness
test is displayed. If you have not yet completed a
fitness test, then the preset date is displayed.
test is displayed. If you have not yet completed a
fitness test, then the preset date is displayed.
Conduct fitness test
The units displayed "m" or "mile" result from the basic settings. In
the chapter "Basic Settings", section "Setting units", you can read
how to change these units.
the chapter "Basic Settings", section "Setting units", you can read
how to change these units.
MENU
Switch to the menu
FitTest
.
START/STOP
The scrolling display appears
Press
START to begin
. Put on the chest
strap. Your pulse will now be shown
on the display and you have five
minutes to warm up. Your HR moni-
tor signals the end of the 5-minute
warmup phase with a beep. In the
event you would like to shorten the
warmup phase, you can press the
button
on the display and you have five
minutes to warm up. Your HR moni-
tor signals the end of the 5-minute
warmup phase with a beep. In the
event you would like to shorten the
warmup phase, you can press the
button
START/STOP
to switch to the next
screen.
Briskly walk exactly 1600m (1 mile).
For this, choose a level route of ex-
actly 1600m. Ideally, you will cover a
distance of four stadium laps (4
times 400m = 1600m).
Briskly walk exactly 1600m (1 mile).
For this, choose a level route of ex-
actly 1600m. Ideally, you will cover a
distance of four stadium laps (4
times 400m = 1600m).