Behringer B-Control Deejay BCD2000 사용자 설명서
15
B-CONTROL DEEJAY BCD2000
7. AUDIO CONNECTIONS
You will need a large number of cables for different applications.
The illustrations below show how the connectors should be wired.
Be sure to use only high-grade cables.
The microphone input of the BCD2000 is electronically balanced
The microphone input of the BCD2000 is electronically balanced
to avoid hum problems.
Of course, you can also connect unbalanced microphones to the
Of course, you can also connect unbalanced microphones to the
balanced input. In this case, connect pin 1 and pin 3.
Fig. 7.1: XLR connector
Fig. 7.2: 1/4" TRS headphones connector
8. SPECIFICATIONS
BEHRINGER is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
8. SPECIFICATIONS
AUDIO INPUTS
Microphone input
Type
Type
XLR balanced
Gain range
-oo - +50 dB
Frequency response
10 Hz - 29 kHz (-3 dB)
Impedance
approx. 2 kΩ (balanced)
Max. input level
-25 dBu @ 35 dB Gain
(mic level center position)
(mic level center position)
Signal-to-noise ratio
110 dB (A-weighted)
Distortion (THD+N)
0.01 % (A-weighted)
CMRR
typ. -40 dB
Equalizer
EQ low
±12 dB @ 40 Hz
EQ high
±12 dB @ 12 kHz
Line inputs
Phono in
Phono in
40 dB Gain
Line in
0 dB Gain
Impedance
approx. 47 kΩ
Max. input level
+12 dBu
AUDIO OUTPUTS
Master Out
Type
RCA
Impedance
120 Ω
Signal-to-noise ratio
101 dB
Crosstalk
<80 dB @ 1 kHz
Max. output level
+18 dBu
Phones Out
Type
Type
1/4" TRS connector
Max. output level
+4.7 dBu (+18.2 dBm) @ 30 Ω loading
DIGITAL PROCESSING
Converter
24 Bit
Sample rate
44.1 kHz
Signal-to-noise ratio
A/D: 100 dB
D/A: 100 dB
USB INTERFACE
Type
Full-Speed 12 MBit/s
SYSTEM SPECIFICATIONS
Signal-to-noise ratio
>80 dB
Crosstalk
<80 dB
Distortion (THD)
0.01%
Frequency response
15 Hz - 21 kHz, +0/-3 dB
POWER SUPPLY
Voltage
100 - 240 V~, 50/60 Hz
Power consumption
max. 7 W
Fuse
T 1 A H 250 V
Mains connection
Standard IEC receptacle
DIMENSIONS/WEIGHT
Dimensions
(W x H x D)
13" x 3.9" x 11.8"
(330 mm x 100 mm x 300 mm)
Weight
approx. 4.41 lbs (2.0 kg)