EnGenius Technologies Wireless Router ECB350 사용자 설명서

44 

 

Select PPTP to begin configuration of the PPTP connection. 

Specify the Maximum Transmit Unit (MTU) size. It is recommended that you accept the default 
setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set too high 
or too low, which impacts network performance. In extreme cases, an MTU setting that is too 
low can prevent the ECB350 from establishing some connections. 

Enter the WAN port IP address. 

Enter the WAN IP subnet mask. 

Enter the WAN gateway IP address. 

Enter the IP address of the PPTP server. 

Enter the Username provided by your ISP. 

Enter the Password provided by your ISP. 

Enter the Service Name provided by your ISP. 

Select the radio button to specify the maximum idle time. Internet connection will disconnect 
when it reach the maximum idle time, but it will automatically connect when user tries to access 
the network. 

Select whether to keep the Internet connection always on, or enter a redial period once the 
internet loses connection. 

Get Automatically From ISP  Click this radio button to obtain the DNS automatically from the DHCP server. 
Use These DNS Servers 

Click the radio button to set up the Primary DNS and Secondary DNS servers manually. 

Check to Enable to recognize pings on the ECB350 WAN interface or Disable to block pings on 
the ECB350 WAN interface. Note: Pinging IP addresses is a common method used by hackers to 
test whether the IP address is valid. Blocking pings provides some extra security from hackers. 

Click Accept to confirm the changes or Cancel to cancel and return previous settings.