Brother MFC-4300 사용자 매뉴얼

      S E T U P   S E N D

If your original is very light or very dark, you might want to set the contrast 
accordingly. Use S.LIGHT to send a very light original. Use S.DARK to send a 
very dark original.

Place the original face down in the ADF.

Press 

, 

, 

, 

.

Press 

 or 

 to select AUTO, S.LIGHT or S.DARK, and then press 

.

Press 

  if you want to select additional settings. The LCD returns to the SETUP 

SEND menu —OR— Press 

 if you are finished choosing settings, and then go 

to Step 5.

Enter a fax number and press 

 to send a fax.

When you have an original in the ADF, you can use the 

 key to change 

the default setting. Press 

 continuously until you see the lights change 

to the setting you want. For Standard, turn Fine and S. Fine lights off. For Photo, 
turn them both on. (See 

Standard—Good for most typed documents.

Fine—Good for small print; transmits a little slower than standard resolution. 

S.Fine (Super Fine)—Good for small print or artwork; transmits slower than 

fine resolution.

Photo—

Use for documents with varying shades of gray; slowest transmission time.

After you send a fax using this feature, the feature turns itself off.

Place the original face down in the ADF.

Press 

, 

, 

, 

.

Press 

 or 

 to select ON (or OFF), and 

then press 

.

Press 

 if you want to select additional settings. The LCD returns to the SETUP 

SEND menu—OR—Press 

 if you are finished choosing settings, and then go 

to Step 5.

Enter the fax number you’re calling. 

Press 

.

5.OVERSEAS MODE