Brother LX-1200 사용자 매뉴얼

- 9 -

Turns the machine on/off.

Cuts the document in the current position.

Manually feeds the laminate and/or the document.

Use this feature to laminate multiple documents.

Use this feature to create an extra border on one-side of your
document (i.e. area for 3-hole punch).

Starts an operation.

Stops an operation.

The machine will trim the film with about a 0.18” (4.5mm) margin
from each edge of the document. - Leaves a margin of laminate.

The machine will trim the film with a margin that is approximately
0.06” (1.5mm) from each edge of the document. - Trims the
laminate close to the document.

Turns the cutting mode off.

Indicates a malfunction of machine.

Engraved on the outside of the cartridge, use as a guide to cut
the excess film before  installing  the cartridge into the machine.

Lift the shutter upward to open the film cartridge cover.

Locks the film cartridge cover and returns the shutter to the
original position.

The top edge of film appears from this film slit.

Plastic side holder

Cutter Off

POWER

No Border

Border

Start

Stop

Error

Feed

Cut

Continuous

Extra Border

POWER DIAL

Cut button

Feed button

Stop button

Start button

Extra Border button

Continuous button

Error
indicator

Film slit

Shutter buttons

Shutter

Cutting line