Brother LX-1200 사용자 매뉴얼
- 35 -
(8)
Return the roller holder levers to its original
position. Push until it clicks into place.
position. Push until it clicks into place.
(9)
Close the top cover.
(10)
Press the Feed button until you can see the
edge of the film to remove any slack from the
film.
edge of the film to remove any slack from the
film.
CAUTION:
Do not touch the surface of the blade when removing a jammed document. This procedure must
be done with great care to avoid personal injury.
Do not touch the surface of the blade when removing a jammed document. This procedure must
be done with great care to avoid personal injury.
Note
If the film has creases or bubbles, press the Feed button until the creases disappear (should be okay
after a few inches of film have been fed). If feeding the film does not correct the problem, check to make
sure the refill is installed correctly in the cartridge (refer to page 26).
If the film has creases or bubbles, press the Feed button until the creases disappear (should be okay
after a few inches of film have been fed). If feeding the film does not correct the problem, check to make
sure the refill is installed correctly in the cartridge (refer to page 26).