Bradford-White Corp THROUGH-THE-WALL GAS WATER HEATER 사용자 설명서

다운로드
페이지 44
 
 
8
 
Installation (Minimum Clearances) continued- 
 
Minimum Clearances 
 
This installation must allow access to the front of the water heater and adequate 
clearance must be provided for servicing and operating this water heater. The 
water heater may be installed on either a combustible or non-combustible floor.  If 
the water heater is to be installed directly on carpeting, it must be installed on 
top of a metal or wood panel extending beyond the full width and depth of the 
appliance by at least three (3) inches (7.6 cm) in any direction or, if the appliance 
is to be installed in an alcove or closet, the entire floor must be covered by the 
panel.  The minimum clearances to combustibles for this water heater are: zero 
(0) inch (0 cm) from the sides and rear, five (5) inches (12.7 cm) from the front of 
the jacket, zero (0) inch (0 cm) from the vent connector and fifteen (15) inches 
(38.1 cm) from the jacket top. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
WARNING
 
Failure to adhere to these installation and operating instructions may 
create a hazard to life and property and will nullify the warranty.
 
INTERNET VERSION FOR REFERENCE ONLY