Whirlpool WFW96HEAU 사용자 설명서

To reinstall washer after non-use, vacation, winter storage, 

or moving:
1.  Refer to Installation Instructions to locate, level, and 

connect washer.

2.  Before using again, run washer through the following  

recommended procedure:

To use washer again:
1.  Flush water pipes and hoses. Reconnect water inlet 

hoses. Turn on both water faucets.

2.  Plug in washer or reconnect power. 
3.  Run washer through HEAVY DUTY cycle to clean washer 

and remove antifreeze, if used. Use only HE detergent. 

Use half the manufacturer’s recommended amount for  

a medium-size load.

Today’s liquid HE detergents are concentrated. Most brands of 

concentrated HE detergent will show the level of concentration 

on the bottle. If so, simply set the concentration level in the  

Precision Dispense menu to match the level shown on the bottle.

However, if the detergent bottle does not give the concentration, 

it can be easily calculated. Just divide the package size in fluid 

ounces by the number of loads. Then refer to the chart below to 

find the concentration.

If you do not get your desired cleaning results, try using a lower 

concentration number. If you have excess suds, try using a higher 

concentration number.

 Concentration 

Number of ounces ÷ number of loads

 2X 

1.5–2.49

 3X 

0.9–1.49

 

4X  

0.7–0.89

 

5X  

0.5–0.69

 6X 

0.3–0.49