Whirlpool WFW96HEAU 사용자 설명서

Not all features and cycles are available on all models.

Touch to turn the washer on and off. Touch to stop/cancel a 

cycle at any time. 

Use your Wash Cycle knob to select available cycles on your 

washer. Turn the knob to select a cycle for your laundry load. 

An LED will light up for the cycle selected. 
NOTE: The Clean Washer LED will flash when the washer 

has run 30 wash cycles as a reminder to run the Clean 

Washer cycle. 
See “Cycle Guide” for detailed descriptions of cycles.
NOTE: For best results when using the Wash & Dry cycle, 

use for loads weighing 2.5 pounds and less, such as a 

soccer uniform or a running tank and shorts.

Touch and hold until the light above START comes on to 

start a cycle, or touch once while a cycle is in process to 

pause it. If you want to add a garment, you can touch START 

when the “Add Garment” LED is on.

When you select a cycle, its default settings will light up and 

the Estimated Time Remaining will be displayed. Factors 

such as load size, wash temperature, and water pressure 

may affect the time shown in the display. Tightly packing, 

unbalanced loads, or excessive suds may cause the washer 

to lengthen the cycle time, as well. 
Touch the desired option along the bottom of the display to 

adjust settings. See “Cycle Guide” for available settings on 

each cycle. Not all settings are available with all cycles.

 Precision  Dispense   
liquid HE detergent cartridge 
Powdered HE detergent compartment

 Liquid fabric softener

Chlorine bleach

For details, see “Cycle Status Lights”.
Precision Dispense – Detergent Concentration  

These options are used to set detergent concentration  

(2x–6x) and to set water hardness level (normal, hard,  

or soft). (See “About Detergent Concentration” section.)
IMPORTANT: When using the dispenser cartridge with 

concentrated liquid detergent, be sure to change the detergent 

concentration settings in the control if the detergent used is 

different than factory preset of 2x concentration. 
Wash Temp 

The recommended wash temperature is preset for each 

cycle. You may also select a wash temperature based on the 

type of fabric and soils being washed. For best results, use 

the warmest wash water safe for your fabric, following the 

garment label instructions. All wash temperatures feature a 

cold rinse.
Spin

This washer automatically selects the spin speed based  

on the cycle selected. Some preset speeds can be changed. 
•  Faster spin speeds mean shorter dry times, but may  

increase wrinkling in your load. 

•  Slower spin speeds reduce wrinkling, but will leave  

your load more damp.

NOTE: The control panel features a sensitive surface that responds to a 

light touch of your finger. To ensure your selections are registered, touch 

the control panel with your finger tip, not your fingernail. When selecting 

a setting or option, simply touch its name.