Whirlpool WMH31017AB 사용자 매뉴얼

Observe all governing codes and ordinances.

■

A 120 volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a 
fuse or circuit breaker.

■

A time-delay fuse or time-delay circuit breaker.

■

A separate circuit serving only this microwave oven.

The Clock is a 12-hour (12:00-11:59) clock. Touch CLOCK, enter time, 
then touch CLOCK or the Start control.

With the microwave oven in standby mode, touch the Timer control, 
enter time, then touch the Timer control or the Start control. Cook 
functions may be entered while the Timer is counting down. To cancel 
timer, touch Timer control while the Timer countdown is active in the 
display.

Activate to avoid unintended start. Touch and hold the Cancel control 
for about 3 seconds until 2 tones sound and padlock icon appears in 
the display. Repeat to unlock control.

High (“SPd2”), low (“SPd1”) and off. Comes on automatically as cooling 
fan during any cook function.

Vent Timer (on some models): Set vent fan to run for exactly 
30 minutes, or to run for only 30 minutes more (off after 30 minutes). 
The vent fan may be turned off at any time using the Vent Fan control. 
Touch and hold number pad “4” for about 3 seconds, until a tone 
sounds and the vent fan turns on.

Programming tones and signals. Programming tones may be turned off, 
or all tones (including end-of-function signals) may be turned off. To 
turn off programming tones, touch and hold number pad “1” for about 
3 seconds, until a confirmation tone sounds. Repeat to turn back on 
programming tones. To turn off all tones, touch and hold number pad 
“2” for about 3 seconds, until a confirmation tone sounds. Repeat to 
turn back on all tones.

Activate to practice using the control without actually turning on the 
magnetron. Touch and hold number pad “3” for about 3 seconds, until a 
confirmation tone sounds, and “DEMO” icon lights up in the display. 
Repeat to deactivate.

For best cooking results, do not operate the microwave oven without 
having the turntable in place.

■  

For all cord connected appliances:
The microwave oven must be grounded. In the event of 
an electrical short circuit, grounding reduces the risk of 
electric shock by providing an escape wire for the electric 
current. The microwave oven is equipped with a cord 
having a grounding wire with a grounding plug. The plug 
must be plugged into an outlet that is properly installed 
and grounded.

WARNING: 

Improper use of the grounding plug can 

result in a risk of electric shock. Consult a qualified 
electrician or serviceman if the grounding instructions are 
not completely understood, or if doubt exists as to whether 
the microwave oven is properly grounded. 

Do not use an extension cord. If the power supply cord is 
too short, have a qualified electrician or serviceman install 
an outlet near the microwave oven.

This device complies with Part 18 of the FCC Rules.