Bounty Hunter Fast Tracker Metal Detector FAST 사용자 설명서
4
BATTERIES
Use ALKALINE batteries only.
Follow these steps to install the batteries.
Follow these steps to install the batteries.
●
1
Carefully remove the battery compartment door by pressing
the release clip on the right side of the door.
the release clip on the right side of the door.
●
2
Snap one battery on to each of the terminals and place the
batteries inside the compartment.
The battery compartment is a tight fit. Insert one battery
with the terminals facing down, and the second battery with
the terminals facing outward. See illustration.
batteries inside the compartment.
The battery compartment is a tight fit. Insert one battery
with the terminals facing down, and the second battery with
the terminals facing outward. See illustration.
●
3
Replace the compartment door by first inserting the hinge on
the side opposite of the release clip.
the side opposite of the release clip.
●
4
Then, press down firmly on the clip side until the battery door
snaps into place.
snaps into place.
First Battery
Second Battery
First Battery
terminals facing in
terminals facing in
Second Battery
terminals
facing out
terminals
facing out
Release
Clip
Clip