Wacom Intuos 사용자 설명서

     Page  115

2.

  Open the control panel to the C

ONNECTION

 tab.  Make sure the T

ABLET

 

D

RIVER

 ON checkbox is selected.  The C

ONNECTION

 S

TATUS

 message should indicate that the tablet is 

responding.  If not, make sure that the Macintosh serial adaptor cable is connected to the tablet cable 
and to an active serial communication port.

3.

  Press the pen tip against the surface of the tablet.  The status LED on the tablet 

should turn from orange to green.  Now, without applying pressure to the pen tip, press the side switch.  
The status LED should again turn from orange to green.  If not, you may have a defective pen or tablet.  
See 

.

Make sure your computer is turned on, the operating system has finished loading, and Intuos is properly 
connected to an active USB port.  Then try the following tests:

1.

  The tablet’s orange status LED will light whenever Intuos is properly 

connected and your computer has registered it as a USB device.  If the LED is on, continue with step 2.
If the LED is off:
•

Make sure all USB cables are securely connected to an active USB port.  Intuos requires that you 
connect to a primary USB port (located directly on your computer) or to a powered USB hub.

•

Connect Intuos into a different USB port or try connecting to the USB port on another computer.

•

If the tablet’s status LED does not illuminate after your computer is on and has finished booting up, 
your USB port may be inactive.   See