Wacom Intuos 사용자 설명서

     Page  121

From the Wacom control panel’s H

ELP

 menu, select D

IAGNOSTICS

... to open the D

IAGNOSTICS

 dialog box.  

The tablet driver version, tablet hardware and connection, and pointing device information is shown.

1. While observing the P

OINTING

 D

EVICE

 I

NFO

 column, bring your Intuos tool within proximity of the tablet.  

A value for proximity, the device name, device type, and a device serial number should be displayed.

2. Move your tool along the tablet surface. The X and Y D

ATA

 values should change to reflect the tool 

position.

3. Test your Intuos Pen or Airbrush buttons.  The tablet’s status LED should change color from orange to 

green each time you click with the tool tip, press the side switch, or press the tool’s eraser to the tablet.
•

Click on the tablet surface with the tool tip—the S

WITCHES

 state and P

RESSURE

 value should 

change.  (P

RESSURE

 should change from approximately 0% with no pressure applied to 

approximately 100% when full pressure is applied.)

•

Next, press the side switch without pressing the tip to the tablet—the S

WITCHES

 state should 

change.  (For the Intuos Pen, do this for both positions of the DuoSwitch.)

Tip = Tip, DuoSwitch (lower position) = b1, DuoSwitch (upper position) = b2, Eraser = Eraser

Tip = Tip, Side Switch = b1, Eraser = Eraser