Wacom Graphire - 4 for Windows & Macintosh 사용자 설명서
10
10
Pointing
The Graphire4 pen positions the pointer (or cursor) on your screen. You can position the screen cursor two
different ways, like a pen (
different ways, like a pen (
) or like a mouse (
•
In P
EN
M
ODE
, the tablet active area is a mapped representation of your computer screen where every
point on the active area corresponds to exactly one point on the display screen; wherever you place the
pen on the tablet, the screen cursor will jump to the corresponding point on the screen. This is the
default setting for the pen.
pen on the tablet, the screen cursor will jump to the corresponding point on the screen. This is the
default setting for the pen.
•
In M
OUSE
M
ODE
, the default setting for the cordless mouse, you move the cursor with a “pick up and
slide” motion similar to using a traditional mouse.
Hints:
•
If you are used to working with a mouse and find that using a pen is somewhat difficult,
try the
try the
•
Pointing is easier when you orient the tablet so the screen cursor follows the same
direction as your hand movements on the tablet.
direction as your hand movements on the tablet.
Try moving the screen cursor by lifting the pen and placing
the pen tip in a new location on the tablet. The cursor
instantly jumps to the new location.
the pen tip in a new location on the tablet. The cursor
instantly jumps to the new location.
When positioning the screen cursor and operating a side
switch, the pen tip needs to be within 5 mm (0.20 inch) of the
tablet surface. You do not need to touch the tablet with the pen
tip in order to move the screen cursor or use a side switch.
switch, the pen tip needs to be within 5 mm (0.20 inch) of the
tablet surface. You do not need to touch the tablet with the pen
tip in order to move the screen cursor or use a side switch.
The cordless mouse works similarly to the pen, and works only
over the active area of the tablet.
over the active area of the tablet.
5 mm (0.20 inch)