Wacom Graphire - Bluetooth for Windows & Macintosh 사용자 설명서

26

26

Some configurations of the tablet come with a printed underlay that can be seen through the transparent 
photo frame.  You can replace the underlay with a favorite photo or design of your own by following these 
steps:

If you would like to create an image that you can use for the tablet underlay, you can use the templates 
provided on the Wacom Pen Tablet Driver CD as a starting point:

1. Insert the Wacom Pen Tablet Driver CD into your computer and locate the T

EMPLATES

 folder.

2. Open the folder to access the template files.  Template files come in various formats that can be modified 

within any graphics application that supports .jpg or .psd formatted files.

3. Choose one of the pre-designed or blank templates.  Then modify it to create your own design.

4. When you are done, print out your new tablet underlay.  Use photo-quality paper for best results.

5. Trim the new underlay to size and place it beneath the tablet photo frame.  See above.

1.

To remove the photo frame, slide the two 
photo frame locks located on each side of the 
tablet to the unlocked position (toward the top 
of the tablet).  Then grasp the upper edges of 
the photo frame with your finger tips and lift 
the photo frame away from the tablet.

2.

Lift away the printed underlay and replace it 
with a new photo or design of your choosing.

3.

To replace the photo frame, insert the tabs 
located on the lower edge of the cover into 
the slots on the tablet.  Then lower the photo 
frame into place and slide the photo frame 
locks to the locked position (towards the 
bottom of the tablet).  This will protect your 
photo or design as you work on the tablet.

To create a new tablet underlay, follow the tips in 
the next section.

Photo frame lock 
(one on each side).