Wacom Graphire - Bluetooth for Windows & Macintosh 사용자 설명서

48

48

After switching on the tablet, 
the power indicator light 
remains on but the screen 
cursor cannot be moved with 
the pen or cordless mouse.

•

Review 

 to be 

sure you are using the input tools correctly.

•

Switch the tablet power off, then back on.

•

If your battery charge is low, plug in the power adapter.

•

Try resetting the tablet by simultaneously pressing both 
ExpressKeys and the power button for about five seconds.  
Then turn off the tablet and switch it back on.  Check the pen and 
mouse operation.

•

Reset the tablet by disconnecting both the battery and the AC power 
connector for at least 10 seconds.  Then reconnect the tablet battery 
and try again.

The charging indicator does 
not light when the power 
adapter is plugged in.

Check that the power adapter is properly plugged into the tablet, and 
that the AC power cord is plugged into the power adapter and an active 
power outlet.

The battery may need replacement.  See 

.

While using the tablet, the 
tablet power indicator light 
flashes once per second.

The battery is nearly empty.  Plug in the power adapter to continue 
working, or power down the tablet.

The pen works only in M

OUSE

 

M

ODE

, and does not draw with 

pressure-sensitivity.

The tablet driver software was not installed or did not load properly.  
Make sure the tablet driver software is installed and functioning.  
Insert the Wacom Pen Tablet Driver CD into your computer and install 
the driver software for the tablet.

Some applications, including Photoshop 7.0 and greater, require that 
you turn on the pressure capabilities before the pen will respond as a 
pressure-sensitive tool.

Clicking is difficult.

Try using a lighter Tip Feel (see