Wacom Graphire - Bluetooth for Windows & Macintosh 사용자 설명서

 

9

9

 

This section contains important information about the battery and power management features of the 
Graphire Bluetooth pen tablet.  Be sure to review the following items:

 for more information about tablet features.

 

Your wireless pen tablet uses a rechargeable Lithium Polymer (Li-Poly) battery as the power source for 
mobile operation, and a power adapter for charging the battery and to operate the tablet using outlet power.  

Before installing or working with Graphire Bluetooth, you must first install the rechargeable battery that came 
with your tablet.

 

1. Turn the wireless tablet upside down and slide open the battery compartment door (see picture below).

2. Align the notch on the battery cable plug with the cutout in the tablet connector, then press the plug into 

the connector as shown.

3. Insert the battery into the battery compartment and close the compartment door.  Move on to 

.

Important: Use only the correct battery provided 
by Wacom and be careful not to drop it on hard 
surfaces.  The battery can be damaged internally 
when dropped, and should be replaced even if 
there is no obvious damage.  This will help 
prevent any future damage that could occur to 
the tablet if the battery has been dropped, is 
installed in the tablet, and then later develops a 
short or leak while in the tablet.

Warnings: 

Do not attempt to install the battery backwards or 
reverse the polarity.  If you do so, you may 
damage the tablet, cause a fire, or personal injury 
may result.

NEVER attempt to use other battery types in your 
tablet.  Doing so may damage the tablet, cause a 
fire, or personal injury may result.

 for additional 

battery cautions and warnings.