Wacom CintiQ - 21UX 사용자 설명서

ADJUSTING PITCH AND PHASE (VGA ONLY)

Some computers and video cards may not allow the auto-sync function to fully work when the interactive
pen display is first connected. If some portion of text appears blurred, use the pen display A

UTO

DJUST

option to automatically synchronize to the incoming signal. If the image is still blurred, adjust pitch and
phase. For optimum display quality, set your video card to the maximum (native) resolution that can be
used with your pen display. Set Cintiq in its working position, then follow the procedure below.

Note: Depending on your product configuration, “Pitch” may also be referred to as “Clock”.

1. Open the Wacom Tablet control panel.

If more than one pen display is installed
on your system, select the unit you are
working with from the T

ABLET

list.

2. Select the C

ALIBRATE

tab.

3. If you are working with multiple

displays, be sure the option
corresponding to the pen display is
selected in the M

ONITOR

menu.

4. Click C

ALIBRATE

... to activate the

calibration screen.

5. Using the pen display On Screen

Display (OSD) controls, open the OSD
menu and select the P

ITCH

option.

Then adjust the pitch level so the
pattern of fine vertical stripes displays
evenly.

6. In the OSD menu, select the P

HASE

option. Adjust the phase level so the
adjustment pattern shows clearly.

7. After completing these adjustments,

press the pen display E

NTER

and M

ENU

buttons to exit the OSD menu.

8. Click on the C

ANCEL

button or press E

to exit the calibration screen.

Crosshairs

Adjustment pattern for pitch and phase (VGA only).