Winegard TRAVELNET TN-2301 사용자 설명서
Ver. 1.5
4/21/2009
4/21/2009
- 3 -
Position the antennas near the cable entry point. Here the TravelNet unit was
located in the front overhead (Figure 1) with the antennas mounted close by on the
roof.
located in the front overhead (Figure 1) with the antennas mounted close by on the
roof.
Figure 2
Note that the antenna mounts are anchored to the 7” x 7” aluminum ground plane
and that everything is well sealed.
Figure 3
3. Insert the small end of the cable through the ¾” diameter hole in the stainless
antenna mount and feed the cable through. Next screw the brass antenna mount
nut to the antenna mount as shown above, with the O-ring down, and attach the
Antennas. Locate the antenna mounts as shown, and attach the stainless Antenna